[olug] Trixbox, Juniper, and IAX2 issues

[home slice]

Yes thats correct, I've got trunk on 4569 and also trying to register IAX
phones on 4569, I'll try additional port for external phone registrations.

Thanks,
Charles



On Tue, Feb 10, 2009 at 11:58 AM, Shawn L. Djernes <shawn at djernes.org>wrote:

> Hello,
>
> Are you trying to register this soft phone with the Trixbox setup or to
> the provider?  If both are registering with the provider then you may be
> having a port conflict.  Try changing the outbound port on the soft
> phone.  This should help.
>
> Shawn
>
> home slice wrote:
> > Hi all,
> >          I have a dev-trixbox at the office and I decided to use the IAX2
> > protocol after I couldnt get the SIP trunks to work.
> > IAX works much better and I can make calls from internal network to PSTN,
> > however, using Zoiper from outside the network, I cant seem to register
> with
> > the PBX on port 4569(Default IAX2 port).
> > I'm pretty sure its something funky with the nat on the Juniper
> > firewall(SSG5), so far I havnt had any luck getting things ironed out and
> I
> > cant tell what exactly the issue is.
> >
> > IAX2 trunk to Dallas works well, no connection issues at all, but the
> same
> > port 4569 from a softphone cant authenticate.  I even assigned my laptop
> a
> > static public IP at the datacenter with no joy.  Anyone here using VOIP
> and
> > going through a Juniper with NAT?
> >
> > I know its something really stupid, just stuck at the moment
> >
> >
> > Thanks,
> > Charles
> > _______________________________________________
> > OLUG mailing list
> > OLUG at olug.org
> > https://lists.olug.org/mailman/listinfo/olug
> >
> >
> _______________________________________________
> OLUG mailing list
> OLUG at olug.org
> https://lists.olug.org/mailman/listinfo/olug
>