[olug] Crossover cable communication

BuzB buzb at cox.net
Wed Oct 2 14:00:16 UTC 2002


On Wednesday 02 October 2002 07:24 am, ERIC MAHLAKO enlightened us with:
> Hi there.
>
> I want to have the following network setup, but I
> don't know how to setup my linux machines to support
> communication crossover cable.
>
> Host1 <===> Router <====> Host2
>
> I can ping Host1 with Host2 via the router and vice
> versa using a hub meaning my routing tables are setup
> correctly. The problem is that when I connect the
> three computers using crossover cable I can not ping
> any computer.
>
> Can anyone help me with this problem, maybe there is
> something missing to be done to all the computers in
> order to support communication with crossover cable.
>
> Thanks
> Lericom
>
<<<<<SNIPPED>>>>>>

Hi Eric,

There really isn't anything you have to do to use a crossover cable between 
two hosts, just ensure it's really a crossover cable and your using the 
correct cable for the scenerio!

To roll your own:  http://www.makeitsimple.com/how-to/dyi_crossover.htm

If I understand your scenerios correctly:

Host1 (192.168.0.2)<>(192.168.0.1)Router(192.168.1.1)<> Host2 (192.168.1.1)
	Pinging from either Host to the Router--Works using a crossover cable

Host1 (192.168.0.2)<===> Hub <===> Host2 (192.168.0.3)
	Pinging from Host to Host through a hub--Works using a straight-through cable

Host1(192.168.0.2)<>(192.168.0.1)Router(192.168.1.1)<> Host2(192.168.1.1)
	Pinging from Host to Host through the router--Doesn't work using a crossover 
cable?

Is your Router a Linux router or other (i.e., Cisco, 3Com, etc)

For a Linux based Router, look at your documentation to enable IP routing and 
if a Cisco router make sure you have ip routing enabled (i.e., 
"router(config)#ip routing"

HTH
-- 
BuzB

Registered Linux User #216668
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Current System Stats:
Linux 2.4.18-10 #1 Wed Aug 7 11:39:21 EDT 2002 i686
  8:26am  up 5 days, 16:45,  4 users,  load average: 1.20, 1.52, 1.70
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Seti work units completed: 3261
Seti client running: 4-13:24:39
Percentage complete: 0.47074363
Last result returned: (Wed Oct  2 04:36:40 2002)





More information about the OLUG mailing list