[olug] unlocked athlon goodness

Jon thechunk at home.com
Sat Aug 25 09:20:10 UTC 2001


I think you can unlock duron /athlon with #2 pencil and steady hand on the bridges.

-Jon W.

On Fri, Aug 24, 2001 at 01:33:13PM -0500, STEVE ELEKES wrote:
> Does anyone have a link to find out more info on chips that have been left
> unlocked or how to unlock one if possible?
> 
> 
> 
> ----- Original Message -----
> From: "Hungate Jim" <Hungate_Jim at prc.com>
> To: <olug at bstc.net>
> Sent: Friday, August 24, 2001 11:25 AM
> Subject: RE: [olug] unlocked athlon goodness
> 
> 
> > That's not bad, I have my Duron 700 running at 100Mhz, it's not stable if
> I
> > up the FSB with KT133 chipset.
> > As a side note, I picked up a Thermaltake Dragon Orb 3 yesterday from
> > Computers 2 Go in Bellevue for $24.50. It dropped my CPU temp by 11
> degrees
> > celcius! I was using the "stock" HSF that came with the CPU and I have a
> > couple of extra case fans. It was running at 44, now it's running at 33.
> >
> > Have you found a good temperature monitoring program?
> > I use Mother Board Monitor in Windows, but I haven't found an equivalent
> > program for Linux.
> >
> >
> > Jim Hungate
> > FIC AZ11E
> > Duron 700 @ 1000
> > Dragon Orb 3
> > 256meg PC133
> > Voodoo4 4500
> > Mandrake 8.0
> >
> > The box said "Requires Windows95 or better", so I installed Linux
> >
> >
> >
> >
> > -----Original Message-----
> > From: kaygee [mailto:kegaut01 at willy.wsc.edu]
> > Sent: Friday, August 24, 2001 11:08 AM
> > To: olug at bstc.net
> > Subject: [olug] unlocked athlon goodness
> >
> >
> > At the meeting last night I asked a question concerning L1 bridges which
> > didn't get an answer but from what I've read I think they shipped me an
> > unlocked AXIA T-bird.  Which apparently isn't as uncommon as you might
> > think.
> >
> > Anyway, I said I'd post my O/C results to the list so I will. The FSB
> > would do 155Mhz (up from 133Mhz) and the core would do 1460Mhz (up from
> > 1200Mhz), but they wouldn't do it together and weren't totally stable
> > (some drive read errors).  It has been totally stable at 144Mhz FSB and
> > 1440 core (10x multiplier), so that's what I'm running it at right now.
> >
> > It hasn't choked yet on 7 hrs of continuous kernel compile loops combined
> > with Q3A demo001 loops so I'd say it's pretty stable.
> >
> > Bottom line, yes virginia, there is a santa claus, and he delivers via
> > FedEx.
> >
> > Keith
> > ----------
> > There's ease of use and then there's ease of usefulness.
> > Choose usefulness. Choose Linux.
> >
> >
> > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> >
> > For help contact olug-help at bstc.net - run by ezmlm
> > to unsubscribe, send mail to olug-unsubscribe at bstc.net
> > or `mail olug-unsubscribe at bstc.net < /dev/null`
> > (c)2001 OLUG http://www.olug.org
> >
> > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> >
> > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> >
> > For help contact olug-help at bstc.net - run by ezmlm
> > to unsubscribe, send mail to olug-unsubscribe at bstc.net
> > or `mail olug-unsubscribe at bstc.net < /dev/null`
> > (c)2001 OLUG http://www.olug.org
> >
> > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> >
> 
> 
> -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> 
> For help contact olug-help at bstc.net - run by ezmlm
> to unsubscribe, send mail to olug-unsubscribe at bstc.net
> or `mail olug-unsubscribe at bstc.net < /dev/null`
> (c)2001 OLUG http://www.olug.org
> 
> -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

For help contact olug-help at bstc.net - run by ezmlm
to unsubscribe, send mail to olug-unsubscribe at bstc.net
or `mail olug-unsubscribe at bstc.net < /dev/null`
(c)2001 OLUG http://www.olug.org

-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_




More information about the OLUG mailing list